Epoxyl is a high-performance, two-component industrial epoxy protective coating designed for a wide range of demanding industrial and commercial applications beyond flooring. It delivers outstanding chemical resistance, exceptional adhesion to steel and concrete, and a long-lasting protective film on structures, tanks, pipework, and machinery. Once fully cured, Epoxyl forms an impervious barrier that resists corrosion, moisture, solvents, and mechanical wear.
Technical Data
Composition
High-performance two-component epoxy coating system
Available Colors
Various (custom colours available)
Finish
Smooth Mild Sheen
Drying Time
28°C Touch dry: 15 mins | Hard dry: 2 hrs
Coverage
5–10 m²/L at 1 coat
Pack Sizes
4L 20L
Application
Brush / Roller / Spray
PRODUCT DESCRIPTION
Epoxyl is a high-performance, two-component industrial epoxy protective coating designed for a wide range of demanding industrial and commercial applications beyond flooring. It delivers outstanding chemical resistance, exceptional adhesion to steel and concrete, and a long-lasting protective film on structures, tanks, pipework, and machinery. Once fully cured, Epoxyl forms an impervious barrier that resists corrosion, moisture, solvents, and mechanical wear.
BENEFITS
- Exceptional chemical and solvent resistance for harsh industrial environments
- Excellent adhesion to steel, concrete, and prepared masonry substrates
- Forms an impervious, hard-wearing protective barrier when cured
- Highly resistant to corrosion, moisture, and atmospheric attack
- Good coverage for efficient application on large industrial surfaces
- Suitable for immersion service, tank lining, and structural protection
USES
- Steel structures, fabrications, and industrial equipment
- Tanks, pipework, and chemical containment areas
- Concrete and masonry structures requiring chemical protection
- Secondary containment areas and bund walls
- Any industrial surface requiring superior chemical and corrosion resistance
PRODUCT SPECIFICATIONS
Epoxyl — Smooth Mild Sheen Finish (Industrial) | Available Sizes: 4L, 20L | Colours: Various | Covering Power: 5–10 m²/L | Weight/Gallon: 28kg ±0.2 & 4.04 ±0.2 | Thinner: Water | Clean Up: Water | Shelf Life: 12 months
Precautions
- Avoid skin and eye contact — use gloves, goggles, and face masks
- Provide adequate ventilation during and after application
- If skin contact occurs, wash thoroughly with soap and water
- If eye contact occurs, flush with water for 15 minutes and seek medical attention
- Ensure surface is properly prepared, clean, and free from contaminants before application
- Mix both components thoroughly and in the correct ratio before use
Quality Assurance
All Ignite Paints products meet quality standards and are manufactured under strict quality control. Technical data represents typical performance under standard conditions (28°C). For specific project requirements, consult our technical team. Note: Always follow the manufacturer’s instructions for surface preparation, application, and cleanup to ensure optimal results.
Additional information
| Size | 20 Litres, 4 Litres |
|---|