Technical Data
Composition
Polymer-modified cementitious waterproofing compound
Available Colors
Grey / White / Various
Finish
Smooth
Drying Time
28°C Touch dry: 1 hr | Full cure: 24–48 hrs
Coverage
1.5–2.0 kg/m² per coat (2 coats recommended)
Pack Sizes
4L 20L
Application
Trowel / Brush / Roller / Spray
PRODUCT DESCRIPTION
Masonix is a high-performance polymer-modified cementitious waterproofing compound designed for the protection of concrete, masonry, and brickwork surfaces against water and moisture penetration. It forms a rigid yet breathable crystalline barrier that bonds directly to cementitious substrates, actively blocking water ingress while allowing trapped moisture vapour to escape. Ideal for below-grade and above-grade waterproofing applications in both residential and commercial construction.
BENEFITS
- Polymer-modified formula for superior adhesion to cementitious surfaces
- Forms an active crystalline waterproofing barrier within the substrate
- Breathable — allows moisture vapour transmission while blocking liquid water
- Suitable for both positive and negative side waterproofing applications
- Good resistance to hydrostatic pressure and water ingress
- Easy to apply by brush, trowel, or spray for versatile application
USES
- Below-grade walls, foundations, and basement structures
- Swimming pools, water tanks, and reservoirs
- Bridge abutments and retaining walls
- Concrete roofs, terraces, and wet rooms
- New construction and waterproofing repair of cementitious surfaces
PRODUCT SPECIFICATIONS
Masonix — Cementitious Waterproofing Compound (Exterior/Interior) | Available Sizes: 4L, 20L | Colours: Grey/White/Various | Coverage: 1.5–2.0 kg/m² per coat | Thinner: Water | Clean Up: Water | Density: 1.5–1.7 | Operating Temp: 28°C
Precautions
- Avoid skin and eye contact — use gloves, goggles, and face masks
- Provide adequate ventilation during and after application
- If skin contact occurs, wash thoroughly with soap and water
- If eye contact occurs, flush with water for 15 minutes and seek medical attention
- Allow full cure before exposure to water or backfilling
- Do not apply on surfaces contaminated with oil, grease, or loose particles
Quality Assurance
All Ignite Paints products meet quality standards and are manufactured under strict quality control. Technical data represents typical performance under standard conditions (28°C). For specific project requirements, consult our technical team. Note: Always follow the manufacturer’s instructions for surface preparation, application, and cleanup to ensure optimal results.
Additional information
| Size | 20 Litres, 4 Litres |
|---|