Alumiguard is a heat-resistant paint containing leafing aluminium flakes. It reflects heat and light, and provides a protective, water-resistant coating for metal roofs, tanks, and radiators. Its highly reflective aluminium finish reduces heat absorption on metal surfaces while simultaneously providing durable protection against corrosion and weather.
Technical Data
Composition
Heat-resistant paint with leafing aluminium flakes
Available Colors
Aluminium / Silver
Finish
Smooth Matt
Drying Time
28°C Touch dry: 20 mins | Hard dry: 2 hrs
Coverage
14 m²/L at 1 coat
Pack Sizes
4L 20L
Application
Brush / Roller / Spray
PRODUCT DESCRIPTION
Alumiguard is a heat-resistant paint containing leafing aluminium flakes. It reflects heat and light, and provides a protective, water-resistant coating for metal roofs, tanks, and radiators. Its highly reflective aluminium finish reduces heat absorption on metal surfaces while simultaneously providing durable protection against corrosion and weather.
BENEFITS
- Reflective aluminium finish reduces heat absorption on metal surfaces
- Heat-resistant formula suitable for high-temperature applications
- Provides water-resistant protection for metal roofs and tanks
- High coverage rate of 14 m²/L for cost-effective application
- Quick-drying formula for efficient project completion
- Good scrub resistance for easy maintenance
USES
- Metal roofing and roof sheeting
- Storage tanks and silos
- Radiators and heat-retaining equipment
- Industrial pipework and metal structures
- Any metal surface requiring heat reflection and weather protection
PRODUCT SPECIFICATIONS
Alumiguard — Smooth Matt Finish (Interior/Industrial) | Available Sizes: 4L, 20L | Colours: Aluminium/Silver | Covering Power: 14 m²/L | Weight/Gallon: 28kg ±0.2 & 4.04 | Thinner: Water | Clean Up: Water | Density: 1.3–1.42 | Viscosity: 6–7 poises | Shelf Life: 12 months
Precautions
- Avoid skin and eye contact — use gloves, goggles, and face masks
- Provide adequate ventilation during and after application
- If skin contact occurs, wash thoroughly with soap and water
- If eye contact occurs, flush with water for 15 minutes and seek medical attention
- Newly plastered surfaces must be primed with alkali-resisting primer before painting
- Ensure all rust, grease, and scale are removed from metal surfaces before application
Quality Assurance
All Ignite Paints products meet quality standards and are manufactured under strict quality control. Technical data represents typical performance under standard conditions (28°C). For specific project requirements, consult our technical team. Note: Always follow the manufacturer’s instructions for surface preparation, application, and cleanup to ensure optimal results.
Additional information
| Size | 20 Litres, 4 Litres |
|---|