Technical Data
Composition
Advanced silicone-based exterior emulsion
Available Colors
Various (custom colours available)
Finish
Matt
Drying Time
28°C Touch dry: 15 mins | Hard dry: 2 hrs
Coverage
Good coverage per coat
Pack Sizes
4L 20L
Application
Brush / Roller / Spray
Product Description:
StormShield is an advanced silicone-based exterior emulsion that is highly permeable yet water-repellent. It is specifically engineered for the long-term protection of masonry against rain, sun, and pollution. Ideal for Nigerian weather conditions, it keeps exterior walls looking fresh and protected year after year.
Benefits:
- Advanced silicone formula for superior water repellency
- Highly permeable, allowing walls to breathe naturally
- Engineered for long-term protection against rain and UV
- Resistant to algae and fungal growth on exterior surfaces
- No blistering or flaking under prolonged weather exposure
- Good scrub resistance for easy outdoor maintenance
Uses:
- Exterior masonry walls and facades
- Plaster, cement, and brickwork surfaces
- Block work, stone, and asbestos surfaces
- Plasterboard, wallboard, and wood
- Residential and commercial exterior surfaces exposed to weather
Product Specifications:
- StormShield — Matt Finish (Exterior)
- Available Sizes: 4L, 20L
- Colours: Various
- Weight/Gallon: 28kg ±0.2 & 4.04 ±0.2
- Thinner: Water
- Clean Up: Water
- Density: 1.2–1.3
- Viscosity: 5–6 poises
- Operating Temp: 28°C
Precautions
- Avoid skin and eye contact — use gloves, goggles, and face masks
- Provide adequate ventilation during and after application
- If skin contact occurs, wash thoroughly with soap and water
- If eye contact occurs, flush with water for 15 minutes and seek medical attention
- Newly plastered surfaces must be primed with alkali-resisting primer before painting
- Ensure surface is not too smooth to avoid impaired adhesion
Quality Assurance
All Ignite Paints products meet quality standards and are manufactured under strict quality control. Technical data represents typical performance under standard conditions (28°C). For specific project requirements, consult our technical team. Note: Always follow the manufacturer’s instructions for surface preparation, application, and cleanup to ensure optimal results.
Additional information
| Size | 20 Litres, 4 Litres |
|---|
