Technical Data
Composition
Flexible elastomeric waterproofing membrane
Available Colors
Various (custom colours available)
Finish
Smooth
Drying Time
28°C Touch dry: 15 mins | Hard dry: 2 hrs
Coverage
Good coverage per coat
Pack Sizes
4L 20L
Application
Brush / Roller / Spray
PRODUCT DESCRIPTION
Atlas is a flexible, elastomeric membrane that forms a seamless, protective barrier against water ingress. It is specifically designed for waterproofing roofs, terraces, balconies, and wet-area walls. Its elastomeric nature allows it to bridge small cracks and remain effective even as the substrate expands and contracts.
BENEFITS
- Forms a seamless waterproof barrier against moisture ingress
- Flexible elastomeric formula bridges hairline cracks
- Protects against water damage on roofs and balconies
- Good scrub resistance for easy surface maintenance
- Quick-drying formula for efficient application
- Durable protection that withstands daily weather exposure
USES
- Flat roofs and terraces
- Balconies and outdoor platforms
- Wet-area walls in bathrooms and utility rooms
- Plaster, cement, and brickwork surfaces prone to water ingress
- Below-grade and above-grade waterproofing applications
PRODUCT SPECIFICATIONS
Atlas — Flexible Elastomeric Waterproofing Membrane (Exterior) | Available Sizes: 4L, 20L | Colours: Various | Weight/Gallon: 28kg ±0.2 & 4.04 ±0.2 | Thinner: Water | Clean Up: Water | Density: 1.2–1.3 | Viscosity: 5–6 poises | Operating Temp: 28°C
Precautions
- Avoid skin and eye contact — use gloves, goggles, and face masks
- Provide adequate ventilation during and after application
- If skin contact occurs, wash thoroughly with soap and water
- If eye contact occurs, flush with water for 15 minutes and seek medical attention
- Newly plastered surfaces must be primed with alkali-resisting primer before painting
- Ensure surface is not too smooth to avoid impaired adhesion
Quality Assurance
All Ignite Paints products meet quality standards and are manufactured under strict quality control. Technical data represents typical performance under standard conditions (28°C). For specific project requirements, consult our technical team. Note: Always follow the manufacturer’s instructions for surface preparation, application, and cleanup to ensure optimal results.
Additional information
| Size | 20 Litres, 4 Litres |
|---|