Bitcom is a heavy-duty bitumen-based waterproofing coating formulated with polymer modifiers for superior flexibility, adhesion, and durability. It provides a seamless, tough, and fully waterproof membrane on a wide range of substrates, including concrete, masonry, metal, and wood. Specially suited to below-grade waterproofing, foundation damp-proofing, and roof waterproofing applications across residential, commercial, and industrial projects.
Technical Data
Composition
Modified bituminous waterproofing coating with polymer additives
Available Colors
Black
Finish
Smooth Semi-Matt
Drying Time
28°C Touch dry: 1 hr | Hard dry: 4–6 hrs | Full cure: 24 hrs
Coverage
1.0–1.5 kg/m² per coat
Pack Sizes
4L 20L
Application
Brush / Roller / Spray
PRODUCT DESCRIPTION
Bitcom is a heavy-duty bitumen-based waterproofing coating formulated with polymer modifiers for superior flexibility, adhesion, and durability. It provides a seamless, tough, and fully waterproof membrane on a wide range of substrates, including concrete, masonry, metal, and wood. Specially suited to below-grade waterproofing, foundation damp-proofing, and roof waterproofing applications across residential, commercial, and industrial projects.
BENEFITS
- Forms a seamless, fully waterproof protective membrane
- Polymer-modified formula for superior flexibility and crack bridging
- Excellent adhesion to concrete, masonry, metal, and wood surfaces
- Resistant to UV, chemical attack, and ground moisture
- High coverage rate for efficient large-area application
- Cost-effective waterproofing solution for foundations and roofing
USES
- Below-grade foundation waterproofing and damp-proofing
- Flat roofs, terraces, and waterproofing membrane applications
- Retaining walls, underground structures, and basements
- Metal and concrete surfaces requiring waterproof protection
- Gutters, downpipes, and drainage channel waterproofing
PRODUCT SPECIFICATIONS
Bitcom — Bitumen Waterproofing Coating (Exterior) | Available Sizes: 4L, 20L | Colours: Black | Coverage: 1.0–1.5 kg/m² per coat | Thinner: Mineral Spirits (if required) | Clean Up: Mineral Spirits | Shelf Life: 12 months
Precautions
- Avoid skin and eye contact — use gloves, goggles, and face masks
- Provide adequate ventilation during and after application
- If skin contact occurs, wash thoroughly with soap and water
- If eye contact occurs, flush with water for 15 minutes and seek medical attention
- Do not apply below 5°C or in wet, damp, or freezing conditions
- Ensure surface is dry, clean, and free from oil, grease, and loose particles before application
Quality Assurance
All Ignite Paints products meet quality standards and are manufactured under strict quality control. Technical data represents typical performance under standard conditions (28°C). For specific project requirements, consult our technical team. Note: Always follow the manufacturer’s instructions for surface preparation, application, and cleanup to ensure optimal results.
Additional information
| Size | 20 Litres, 4 Litres |
|---|