Technical Data
Composition
Modified silicone resin high-temperature coating
Available Colors
Aluminium
Finish
Eggshell
Drying Time
28°C Touch dry: 1 hr | Min. recoat interval: 24 hrs
5–10°C Touch dry: 3 hrs | Recoat: 48 hrs
Coverage
9 m²/L at 25 microns DFT
Pack Sizes
4L 20L
Application
Airless Spray (recommended) / Brush / Roller
PRODUCT DESCRIPTION
Thermaguard is a high-temperature resistant coating formulated with modified silicone resin, designed to withstand continuous dry heat exposure up to 540°C. It provides excellent weathering performance, strong resistance to atmospheric conditions, and good resistance to chemicals, fresh water, and saltwater. Suitable for both on-shore and off-shore high-temperature industrial installations.
BENEFITS
- Withstands continuous heat exposure up to 540°C
- Excellent weathering and atmospheric resistance
- Good resistance to chemicals, fresh water, and saltwater
- Excellent colour and gloss retention under extreme conditions
- Good oil resistance for industrial environments
- Suitable for both on-shore and off-shore installations
USES
- Exhaust systems (2-coat application)
- Boilers and industrial generators
- Chimneys and flue stacks
- Heat exchangers
- Industrial equipment operating under elevated temperatures
PRODUCT SPECIFICATIONS
Thermaguard — Eggshell Finish (Industrial) | Available Sizes: 4L, 20L | Pack Size: 4.04 kg & 21.8 kg | Colour: Aluminium | Coverage: 9 m²/L at 25 microns | Reduction Thinner: Do not thin | Clean Up Thinner: Thinner 06-69 | Shelf Life: 12 months | Airless Spray: Nozzle 0.38mm / Pressure 80–120 atm
Precautions
- Not recommended in areas of high acidity or alkalinity
- Do not apply when the metal surface is already hot
- Ensure adequate ventilation during application and curing
- Avoid contact with skin and eyes — use gloves, goggles, and masks
- If contact occurs, wash affected area with soap and water immediately
- Keep away from heat sources, sparks, and open flames; no smoking in the application area
- Store up to 12 months in a cool, dry, well-ventilated place away from direct sunlight
- Surface preparation: abrasive blasting to Sa 2 / SSPC-SP10 recommended
Quality Assurance
All Ignite Paints products meet quality standards and are manufactured under strict quality control. Technical data represents typical performance under standard conditions (28°C). For specific project requirements, consult our technical team. Note: Always follow the manufacturer’s instructions for surface preparation, application, and cleanup to ensure optimal results.
Additional information
| Size | 20 Litres, 4 Litres |
|---|