Technical Data
Composition
Decorative acrylic coating with granite-effect stone aggregate fillers
Available Colors
Various granite-inspired tones (custom colours available)
Finish
Granite Stone Effect Textured
Drying Time
28°C Touch dry: 15 mins | Hard dry: 2 hrs
Coverage
Varies by application thickness
Pack Sizes
4L 20L
Application
Trowel / Brush / Roller / Spray
PRODUCT DESCRIPTION
Granexa is a premium granite stone effect coating that replicates the natural texture and depth of real granite on any wall surface. Formulated with carefully selected stone aggregate fillers within a high-performance acrylic binder, it delivers an authentic, multi-tonal stone appearance without the weight, cost, or complexity of natural stone installation. Equally at home on interior feature walls and exterior facades.
BENEFITS
- Authentic granite stone effect for a premium architectural appearance
- Stone aggregate fillers for genuine multi-tonal depth and texture
- Highly durable and resistant to cracking, chipping, and weathering
- Excellent UV and weather resistance for long-lasting exterior performance
- Good scrub resistance for easy maintenance in high-use spaces
- Cost-effective alternative to natural granite cladding
USES
- Feature walls in luxury homes, hotels, and commercial spaces
- Exterior facades and architectural accent panels
- Interior lobbies, reception areas, and corridors
- Plaster, cement, masonry, and brickwork surfaces
- Columns, pillars, and architectural highlight elements
PRODUCT SPECIFICATIONS
Granexa — Granite Stone Effect Textured Finish (Exterior/Interior) | Available Sizes: 4L, 20L | Colours: Various | Thinner: Water | Clean Up: Water | Density: 1.2–1.3 | Viscosity: 5–6 poises | Operating Temp: 28°C
Precautions
- Avoid skin and eye contact — use gloves, goggles, and face masks
- Provide adequate ventilation during and after application
- If skin contact occurs, wash thoroughly with soap and water
- If eye contact occurs, flush with water for 15 minutes and seek medical attention
- Newly plastered surfaces must be primed with alkali-resisting primer before painting
- Ensure surface is clean, stable, and properly prepared before application
Quality Assurance
All Ignite Paints products meet quality standards and are manufactured under strict quality control. Technical data represents typical performance under standard conditions (28°C). For specific project requirements, consult our technical team. Note: Always follow the manufacturer’s instructions for surface preparation, application, and cleanup to ensure optimal results.
Additional information
| Size | 20 Litres, 4 Litres |
|---|