Technical Data
Composition
High-performance two-component epoxy coating system
Available Colors
Various (custom colours available)
Finish
Smooth Mild Sheen
Drying Time
28°C Touch dry: 15 mins | Hard dry: 2 hrs
Coverage
5–10 m²/L at 1 coat
Pack Sizes
4L 20L
Application
Brush / Roller / Spray
PRODUCT DESCRIPTION
TitanFloor is a high-performance industrial epoxy floor coating engineered to deliver superior protection in demanding environments. Formulated as a two-component system, it provides outstanding resistance to chemicals, abrasion, and moisture while maintaining a seamless, easy-to-clean surface.
Designed for both industrial and commercial applications, TitanFloor creates a dense, impact-resistant coating that withstands heavy traffic, machinery movement, and harsh operating conditions. Once fully cured, it forms a tough, long-lasting finish that enhances both durability and visual appeal of concrete and masonry surfaces.
BENEFITS
- Excellent resistance to chemicals, oils, and industrial fluids
- High abrasion resistance for long-term surface protection
- Forms a hard, impact-resistant coating after curing
- Seamless finish prevents dust accumulation and contamination
- Easy to clean and maintain in high-use environments
- Withstands heavy foot traffic and mechanical loads
- Strong adhesion to properly prepared concrete surfaces
- Suitable for both interior and selected exterior applications
USES
- Industrial floors and production facilities
- Warehouses and storage units
- Car parks and garages
- Food processing and wet areas
- Commercial buildings and institutional facilities
- Workshops and heavy-duty service areas
- Any surface requiring durable, chemical-resistant protection
PRODUCT SPECIFICATIONS
TitanFloor — Smooth Mild Sheen Finish (Industrial/Exterior) | Available Sizes: 4L, 20L | Colours: Various | Covering Power: 5–10 m²/L | Weight/Gallon: 28kg ±0.2 & 4.04 ±0.2 | Thinner: Water | Clean Up: Water | Shelf Life: 12 months
Precautions
- Avoid skin and eye contact — use gloves, goggles, and face masks
- Provide adequate ventilation during and after application
- If skin contact occurs, wash thoroughly with soap and water
- If eye contact occurs, flush with water for 15 minutes and seek medical attention
- Ensure surface is properly prepared, clean, and free from contaminants before application
- Mix both components thoroughly and in the correct ratio before use
Quality Assurance
All Ignite Paints products meet quality standards and are manufactured under strict quality control. Technical data represents typical performance under standard conditions (28°C). For specific project requirements, consult our technical team. Note: Always follow the manufacturer’s instructions for surface preparation, application, and cleanup to ensure optimal results.
Additional information
| Size | 20 Litres, 4 Litres |
|---|